| Shop > Climbing > Petzl |
| |
 | | |
Ref: CA020 | Petzl FIXE Pulley with fixed side-plates
Suitable for hauling systems and as a directional pulley.
- Lightweight, compact and very strong.
- Sheave fitted with self-lubricating bushings for good efficiency.
- May be combined with a mechanical rope clamp / grab.
Certification: CE EN 12278
Technical specifications:
- Breaking strength : 11 kN x 2 = 22 kN
- Working load : 2.5 kN x 2 = 5 kN
- For use with ropes of 13 mm maximum diameter.
- 90g
- Individually tested
Data Sheet
Price: £13.50
(Excluding: VAT at 20%)
|
|
 |
Ref: CA021 | Petzl RESCUE Swing-sided pulley
Designed for rescue or hauling heavy loads.
- Large sheave mounted on sealed ball bearings for high efficiency.
- Pulley specifically designed for heavy loads and intensive use.
- Triangular attachment point can accept up to three carabiners, facilitating maneuvers and installation.
Certification: CE EN 12 278
Technical specifications:
- Breaking strength : 16 kN x 2 = 32 kN
- Working load : 4 kN x 2 = 8 kN
- For use with ropes of 13 mm maximum diameter
- 186g
- Individually tested
Data Sheet
Price: £39.00
(Excluding: VAT at 20%)
|
|
|
Ref: CA022 | Petzl TANDEM In-line double pulley with aluminium sheaves
Designed for use with Tyrolean traverses on rope.
- Sheaves fitted with self-lubricating bushings for good efficiency.
- May be used at speeds of up to 10 meters/second.
- Can be used to build rope pulley systems.
- Colour : red.
Certification: CE EN 12 278
Technical specifications:
- Breaking strength 24 kN
- Working load 10 kN
- For use with ropes of maximum diameter 13 mm
- 195g
- Individually tested
Data Sheet
Price: £30.00
(Excluding: VAT at 20%)
|
|
|
Ref: CA023 | Petzl ASCENSION Handled rope clamp (left-handed version)
- Handle with ergonomic grip for comfort and thermal insulation
- Trigger cam with teeth and cleaning slot: works even on dirty or icy ropes
- Ergonomic spring-loaded catch is easy to use even when wearing gloves
- Spring-loaded catch can be locked in the open position so the rope clamp can be put on or taken off the rope with one hand
- Two holes on the bottom: one to connect a lanyard and one for installing a foot loop with a quick link
- The upper holes allow a carabiner to be clipped so the rope clamp can be used for self-belaying or with hauling systems
- Available in right-handed (blue)and left-handed (yellow) versions.
Certification:
Technical specifications:
- 195 g
For single ropes between 8 and 13 mm in diameter.
Right hand, blue frame: B17 R.
Left hand, yellow frame: B17 L.
Individually tested.
Colour: Yellow
Data Sheet
Price: £31.00
(Excluding: VAT at 20%)
|
|
|
Ref: CA024 | Petzl ASCENSION Handled rope clamp (right-handed version)
- Handle with ergonomic grip for comfort and thermal insulation
- Trigger cam with teeth and cleaning slot: works even on dirty or icy ropes
- Ergonomic spring-loaded catch is easy to use even when wearing gloves
- Spring-loaded catch can be locked in the open position so the rope clamp can be put on or taken off the rope with one hand
- Two holes on the bottom: one to connect a lanyard and one for installing a foot loop with a quick link
- The upper holes allow a carabiner to be clipped so the rope clamp can be used for self-belaying or with hauling systems
- Available in right-handed (blue)and left-handed (yellow) versions.
Certification:
Technical specifications:
- 195 g
For single ropes between 8 and 13 mm in diameter.
Right hand, blue frame: B17 R.
Left hand, yellow frame: B17 L.
Individually tested.
Colour: Blue
Data Sheet
Price: £31.00
(Excluding: VAT at 20%)
|
|
|
Ref: B1650003 | Petzl CROLL Chest-mounted rope clamp
To be used in conjunction with the ASCENSION for ascending a rope.
Trigger cam with teeth and cleaning slot: works even on dirty or icy ropes.
Ergonomic spring-loaded catch designed to facilitate installation/removal of rope when the device is in place on chest.
Spring-loaded catch can be locked in the open position so the rope clamp can be put on or taken off the rope with one hand.
The attachment hole is oriented so the device lies flat against the chest when clipped in.
For use with the SECUR should straps, which hold the rope clamp in position.
Certification
CE EN 567
Technical specifications
130 g.
For single ropes between 8 and 13 mm in diameter.
Individually tested.
Data Sheet
Price: £29.00
(Excluding: VAT at 20%)
|
|
|
Ref: B02500 | Petzl PANTIN - Right foot ascender
Used in conjunction with the CROLL and ASCENSION rope clamps.
Make ascending ropes quicker and less tiring.
Trigger cam with teeth and cleaning slot: works even on dirty or icy ropes.
Easy adjusts with DoubleBack buckle.
Under-foot strap is reinforced with Dyneema for abrasion resistance.
Can be removed from the rope with a simple backwards leg movement.
Technical specifications
120 g.
For single ropes between 8 and 13 mm in diameter.
Right-foot version - PANTIN (B02ARA): right foot, yellow rope clamp
The PANTIN is not a PPE
Data Sheet
Price: £37.50
(Excluding: VAT at 20%)
|
|
|
Ref: PANTIN | Petzl PANTIN - Left foot ascender
It is used to complement CROLL, ASCENSION and ASCENTREE rope clamps
New cam facilitates passage of the rope through device, even on the first meters
Cam is totally integrated into the body of the rope clamp to help prevent rubbing
Makes ascent faster and less tiring
Releases from the rope with a simple backwards movement of the foot
Sole strap reinforced with Dyneema for abrasion resistance
Easy adjustment with DoubleBack buckle
Technical specifications
Left-foot version - PANTIN (B02ALA): left foot, black rope clamp
For single ropes between 8 and 13 mm in diameter
Weight: 120 g
The PANTIN is not an item of PPE.
Price: £36.50
(Excluding: VAT at 20%)
|
|
|
Ref: ASCENTREE | Petzl ASCENTREE - double handled arborist rope clamp
Designed for ascending double ropes in trees using the "footlock" technique or with two PANTIN foot ascenders.
Ergonomic molded handle allows a comfortable yet powerful grip
Cam is totally integrated into the body of the rope clamp to prevent rubbing
Large handles can be used with thick gloves
Lower holes for connecting a SPELEGYCA lanyard and installing a FOOTPRO foot loop with a quick link
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling)
Technical specifications
For use on ropes between 8 and 13 mm in diameter
Certification: CE
Individually tested
Weight: 390 g
Price: £99.50
(Excluding: VAT at 20%)
|
|
|
Ref: D14601I | Petzl GRIGRI® Self-braking belay device and descender
For work positioning on inclined surfaces and for switching between short ascents and descents on a rope.
Simple to use:
control the rope running through the device by varying the grip on the free end of the rope,
use the handle to unlock the rope,
self-braking system: if the handle is released during descent, the cam rotates to pinch the rope and brake the user's descent.
ascending the rope is possible without changing the position of the device: simply add a footloop and a handled rope clamp / grab.
Allows for belaying a leader or second. If a fall occurs, device facilitates braking.
Certification
CE
Technical specifications
For rope diameters from 10 to 11 mm
Weight: 225 g
Data Sheet
Price: £48.00
(Excluding: VAT at 20%)
|
|
|
Ref: P58500CS | Petzl SWIVEL S (small)
Prevents the rope from twisting when the load is turning.
Mounted on sealed ball bearings.
SWIVEL S: compact, designed for one-person loads.
Technical specifications
Ref# P58 S
Breaking strength23 kN
Certification CE
Weight 95 g
Data Sheet
Price: £37.00
(Excluding: VAT at 20%)
|
|
|
Ref: P58500CL | Petzl SWIVEL L (large)
Prevents the rope from twisting when the load is turning.
Mounted on sealed ball bearings.
SWIVEL L: designed for two-person loads, up to 3 connectors can be attached in the ends.
Technical specifications
Ref# P58 L
Breaking strength 36 kN
Certification CE, NFPA G
Weight 150 g
Data Sheet
Price: £43.00
(Excluding: VAT at 20%)
|
|
|
Ref: D0550002 | Petzl PIRANA Canyoning descender
Descender with three braking positions, designed for use with canyoning descent techniques.
Three different braking positions to choose from before beginning descent depending on the user's weight, the rope's diameter and the terrain.
Two supplementary braking spurs allow friction to be increased during descent.
A carabiner with a cross section of 12 mm (like an ATTACHE) provides a tight fit in the small hole, creating a «rigid» carabiner / descender unit:
stays securely attached to the harness during rope insertion, to help prevent loss,
greatly reduces the risk of leverage on the carabiner gate (poor positioning).
Designed to be used with the "Rapid" technique, which prevents the formation of a lark's head knot around the body of the PIRANA and reduces kinks in the rope, without decreasing braking friction.
Technical specifications
For use on ropes from 8 to 13 mm
Designed for single rope
Can be used on double ropes, but certain braking positions may not be usable depending on the ropes' diameter,
For use with a locking carabiner with a 12 mm cross section (ATTACHE or WILLIAM)
90 g
Data Sheet
Price: £18.50
(Excluding: VAT at 20%)
|
|
|
Ref: RSM2 | Petzl SPATHA Knife with carabiner hole
Easy opening knife with carabiner hole. Can be attached to a harness or a bag, making it difficult to lose.
- Textured wheel at blade axis allows easy opening.
- Serrated blade on small version useful for cutting webbing and rope. Large model with smooth blade is ideal for cutting bread and sausage.
- Waterproof: rust-proof blade and plastic handle.
Technical specifications
| Reference |
Color |
Size closed |
Weight |
| S92 S |
Orange |
98 mm |
50 g |
Price: £13.00
(Excluding: VAT at 20%)
|
|
|
Ref: ABSORBICA L57 | Petzl ABSORBICA - sewn webbing energy absorber
Sewn-webbing energy absorber
Component of a complete fall-arrest system
Often used in combination with a lanyard to build an energy-absorbing lanyard with a maximum length of 2 meters
Ends equipped with STRING
Compact and lightweight
Price: £26.00
(Excluding: VAT at 20%)
|
|
|
Ref: ASAP | Petzl ASAP - Mobile fall arrest device for rope
• For use on a safety rope
• Stops a fall, a slide or uncontrolled descent
• Locks even if the device is grabbed during a fall
• Works on vertical or angled rope
• Moves up and down along the rope without manual
intervention
• Easy to install and remove at any point on the rope
• Can be used with an energy absorbing lanyard
• For 10.5 to 13 mm semi-static ropes (EN 1891
type A) certified with the device*
• Comes with the OK TRIACT automatic locking
carabiner
• Weight: 427 g (350 g for ASAP and 77 g for
OK TRIACT)
• Individually tested
• Certification: CE EN 353 2, CE EN 12841 type A
Price: £101.00
(Excluding: VAT at 20%)
|
|
|
Ref: L7120 | Petzl ASAP'SORBER - Energy absrober with intergrated lanyard for ASAP
Designed to connect the ASAP mobile fall arrester to a harness.
The energy generated from a fall is absorbed by the tearing of specific stitching.
Available in two lengths, for the desired distance from the safety rope.
Terminations equipped with STRINGs to hold the connector in position and protect the webbing from abrasion.
Certification
CE EN 355
Technical specifications
Reference Length Necessary clearance Weight
L71 20 20 cm 3,15 m 60 g
L71 40 40 cm 3,50 m 100 g
Price: £12.50
(Excluding: VAT at 20%)
|
|
|
Ref: L7140 | Petzl ASAP'SORBER - Energy absrober with intergrated lanyard for ASAP
Designed to connect the ASAP mobile fall arrester to a harness.
The energy generated from a fall is absorbed by the tearing of specific stitching.
Available in two lengths, for the desired distance from the safety rope.
Terminations equipped with STRINGs to hold the connector in position and protect the webbing from abrasion.
Certification
CE EN 355
Technical specifications
Reference Length Necessary clearance Weight
L71 20 20 cm 3,15 m 60 g
L71 40 40 cm 3,50 m 100 g
Price: £15.50
(Excluding: VAT at 20%)
|
|
|
Ref: BASIC | Petzl BASIC - frame-loaded rope clamp without handle
Compact and lightweight rope clamp.
Multi-purpose: ascending a rope, self-belaying on a fixed rope, as a progress capture device in hauling systems, etc.
Trigger cam with teeth and cleaning slot: works even on dirty or icy ropes.
Ergonomic spring-loaded catch is easy to use even when wearing gloves.
Spring-loaded catch can be locked in the open position so the rope clamp can be put on or taken off the rope with one hand.
Lower hole for connecting a lanyard.
The upper holes allow a carabiner to be clipped so the rope clamp can be used for self-belaying or with hauling systems.
Certification
CE EN 567
Technical specifications
135 g.
For single ropes between 8 and 13 mm in diameter.
Individually tested.
Price: £27.50
(Excluding: VAT at 20%)
|
|
|
Ref: D20L | Petzl I'D L - Self braking descender with anti-panic function for rescue
For descending a rope and for belaying, with an anti-panic function.
Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope.
Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope.
Locking position on the handle for positioning while on the rope.
When used for hauling, allows the system to be reversible.
Available in 2 versions:
D20 S for work on ropes.
With a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors.
For ropes between 10 and 11,5 mm in diameter.
D20 L for rescue.
For ropes between 11,5 and 13 mm in diameter.
Certification
D20 S : CE EN 341 Classe A, NFPA L.
D20 L : CE EN 341 Classe A, NFPA G.
Technical specifications
Weight: 530 g.
D20 S: for rope diameters from 10-11.5 mm.
D20 L: for rope diameters from 11.5-13 mm.
Individually tested.
Price: £114.00
(Excluding: VAT at 20%)
|
|
|
Ref: D20S | Petzl I'DS - Self-braking descender with anti-panic function for working on fixed ropes
For descending a rope and for belaying, with an anti-panic function.
Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope.
Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope.
Locking position on the handle for positioning while on the rope.
When used for hauling, allows the system to be reversible.
Available in 2 versions:
D20 S for work on ropes.
With a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors.
For ropes between 10 and 11,5 mm in diameter.
D20 L for rescue.
For ropes between 11,5 and 13 mm in diameter.
Certification
D20 S : CE EN 341 Classe A, NFPA L.
D20 L : CE EN 341 Classe A, NFPA G.
Technical specifications
Weight: 530 g.
D20 S: for rope diameters from 10-11.5 mm.
D20 L: for rope diameters from 11.5-13 mm.
Individually tested.
Price: £114.00
(Excluding: VAT at 20%)
|
|
|
Ref: MINIPRUSIK | Petzl MINI PRUSIK - Lightweight Prusik pulley
Designed for pulley systems and hauling.
Suitable for use with a Prusik hitch as a progress capture device.
Sheave fitted with sealed ball bearings for high efficiency.
Very compact, flat shape.
Certification
CE EN 12 278
Technical specifications
Breaking strenght : 8.5 kN x 2 = 17 kN.
Working load: 2 kN x 2 = 4 kN.
For use with ropes of maximum diameter 11 mm.
80 g
Individually tested
Price: £32.00
(Excluding: VAT at 20%)
|
|
|
Ref: MINITRAXION | Petzl MINI TRAXION - Compact and lightweight progress capture pulley
A multipurpose 3-in-1 device (pulley, self-jamming pulley, rope clamp / grab) for hauling a sack, raising a person, setting up a hauling system or selfbelaying.
Sheave with self-lubricating bushings is efficient and compact.
Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes.
Efficiently replaces the traditional pulley system set-up: pulley + carabiner + rope clamp / grab.
Also works well for Tyrolean traverses and for ascending rope...
Will find a place in all work or rescue kits.
Certification
CE EN 567 & EN 12 278
Technical specifications
Breaking strength when used as pulley only: 10 kN x 2 = 20 kN.
Working load when used as pulley only: 2.5 kN x 2 = 5 kN.
Breaking strength when used as selfjamming pulley: 4 kN.
Working load when used as selfjamming pulley: 2.5 kN.
For use with ropes from 8 to 13 mm in diameter.
164 g
Individually tested
Price: £42.00
(Excluding: VAT at 20%)
|
|
|
Ref: EPLUSLITE | Petzl e+Lite - Headlamp for emergency situations for use in hazardous locations
Long-term dependability, even when kept for years in harsh conditions
functions in extreme temperatures: from -30 °C to +60 °C,
always ready for use: can be stored with batteries for up to 10 years and still be operational,
waterproof down to -1 m,
protective case included,
can be used in potentially explosive atmospheres (see specifications for certification level),
compact and ultra-lightweight (27 g), there's no excuse not to carry it where ever you go,
designed to prevent accidental operation with locking switch.
Technical specifications
3 white LED and 1 red LED.
Uses CR2032 lithium batteries (included).
Waterproof down to -1 m. weight : 27 g with batteries.
2 lighting levels: economic and maximum.
White and red strobe mode.
Clip attachment system and removable elastic headband.
Light source rotates 360° on ball and joint.
10-year guarantee.
Price: £22.00
(Excluding: VAT at 20%)
|
|
|
Ref: SIGNAL | Petzl SIGNAL - Versatile blinking red safety light
Multidirectional performance safety light ensures you are seen :
- can be used in blinking and constant lighting modes
- visible for 1000 m
- 180° visibility
- lasts 120 h in blinking mode and 40 h in constant lighting mode
Certification
CE
Technical specifications
- 2 lithium CR2032 batteries (included)
- Waterproof down to - 1 m
- Weight: 22 g including batteries
- Two lighting modes: blinking and constant
- Integrated clip, removable and adjustable elastic strap included
- 3-year guarantee
Price: £9.50
(Excluding: VAT at 20%)
|
|
|
Ref: ULTRA | Petzl ULTRA - Ultra-powerful headlamp, 3 regulated brightness levels, ACCU 2 ULTRA rechargeable battery
• Ultra high-output regulated lighting:
- 350 lumens
- constant lighting level, automatically switches to
reserve power mode when battery pack is almost
discharged
- New generation power LEDs
• Comfortable and ergonomic:
- excellent fit on the head: compact design, flexible
stabilization plate and comfort foam, wide elastic
headband and adjustable top strap
- easy to use: choice of lighting level with intuitive
dial
• Rechargeable high-performance batteries:
- rechargeable 2000 mAh Lithium Ion battery offers
large capacity and excellent performance at low
temperatures, but remains as light as possible
- test button for rechargeable battery with battery
level indicator
Price: £210.00
(Excluding: VAT at 20%)
|
|
|
Ref: ULTRABELT | Petzl ULTRA BELT - Ultra-powerful headlamp, three brightness levels, ACCU 4 ULTRA remote rechargeable battery
• Ultra high-output regulated lighting:
- 350 lumens
- constant lighting level, automatically switches to
reserve power mode when battery pack is almost
discharged
- New generation power LEDs
• Comfortable and ergonomic:
- excellent fit on the head: compact design, flexible
stabilization plate and comfort foam, wide elastic
headband and adjustable top strap
- battery pack can be moved into a pocket or a
backpack to lighten the load worn on the head as
much as possible
- easy to use: choice of lighting level with intuitive dial
Price: £230.00
(Excluding: VAT at 20%)
|
|
|
Ref: ACCU2ULTRA | Petzl ACCU 2 Ultra - High performance, large capacity rechargable battery for Ultra and Ultra belt headlamps
Lithium Ion 2000 mAh battery pack
• Lightweight: 145 g
• Large capacity and excellent performance at low
temperatures, with Lithium Ion technology
• Integrated electronic protection circuit to prevent
overcharging or completely depleting the batteries
• Test button with power level indicator
• Weight: 145 g
• CE
• 3-year guarantee
Price: £77.50
(Excluding: VAT at 20%)
|
|
|
Ref: CARITOOLP42L | Petzl CARITOOL P42 L - tool holder
Tools can be attached and removed with a simple hand movement.
Attaches to slots in the waistbelt of the harness, or onto the webbing of the harness.
Inside clip helps stabilize tool holder's position on the harness.
The flat top aids in sorting gear.
Small hole on top for attaching keeper cord, to help prevent dropping critical gear.
Lightweight.
Certification
Attaches to the slots in the SEQUOIA waistbelt or directly onto the webbing of other harnesses.
Technical specifications
CARITOOL L P42 L, 15 kg maximum load. Weight: 60 g.
Price: £7.50
(Excluding: VAT at 20%)
|
|
