| Shop > Climbing > Pulleys |
| |
 | | |
| |
 |
Ref: DMMPintoPulley | DMM Pinto Pulleys
Beautiful Beasts
DMM Pinto pulleys allow things to happen! With hardly a straight line in sight, all those hot forged curves make for a 'textile friendly' environment. Attachment points can be used for webbing or cordage, in addition to carabiners. Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. And with the becket, sheave and attachment holes equally rated, all sorts of wonderful configurations become possible!
Pinto, a pulley you need to own!
GENERIC FEATURES
- Both beauty and beast - brutally high strength and sensual 'textile friendly' curves
- Fairlead flares help maintain high working efficiency by feeding the rope cleanly on to the sheave
- Rounded cheek plates edges maintain low rope abrasion when rope is fed 'unfair'
- Size of attachment holes reduce probability of locking carabiner rotation
- Direct connection to textile components is possible at the rounded cross section of anchor holes and gently curved becket
- Textile connections can reduce system costs, increase lift height in mechanical advantage systems, reduce costs and generally increase tolerance to torsion
- Highly efficient and robust bearing systems
- Becket rated to full MBS
- Compatible with DMM Ultra O and Boa carabiners
- Tamperproof construction
- Individual serial marking
- Made in Wales, UK
SUGGESTED AREAS OF APPLICATION
- Rescue
- Fall protection
- Rigging
- Pre-assembled mechanical advantage systems
TECHNICAL SPECIFICATIONS
- CE certified to EN795B:1997 (Transportable temporary anchor device) and
EN12278:2007 (Pulley). NFPA G rating.
- Hot forged frame 7075 T6 aluminium for exceptional strength to weight ratio
- 17-4 PH stainless steel spindle
- Oilite bushing (Pinto S) or 6000 series ball bearings (Pinto L)
- Anodised to EN12373-1:2001 Class 10E1
MBS
Pinto S
- Max rope diameter 13mm
- MBS 40kN
- WLL 8kN
Pinto L
- Max rope diameter 16mm
- MBS 50kN
- WLL 10kN
|
|
|
Small DMM Pinto pulley
Ref: PintoS |
Price: £24.50
(Excluding: VAT at 20%)
|
|
|
Large DMM Pinto pulley
Ref: PintoL |
Price: £38.50
(Excluding: VAT at 20%)
|
|
|
Ref: HC001 | Hitch Climber
The concept is simple - compact rigging plate and high efficiency pulley in one!
Developed with those clever folk at DMM, this is the first hot forged pulley to hit the market. Blessed with sensual curves and many little details, this little beauty was designed to be at the heart of friction hitch climbing systems (with stitched eye to eye slings), but has many other applications.
Taking the place of conventional fairlead pulleys, the Hitch Climber helps organise karabiners, reducing the probability of poor configurations such as cross loading. Tension in the climbing line is transferred through both karabiners and the rigging plate. Doesn’t matter if you are ascending or descending, karabiners tend to be kept in the correct alignment.
The full range of anchor point sizes, from pulley saver to large stem, are accommodated without changing the everyday set-up. The climbing line is pretty much left alone by the pulley until it is needed, there is less friction build up below the hitch. That means the friction hitch will ‘self-tail’ sooner. It’s possible to use shorter (stitched) slings for tying your hitch too, which reduces ‘sitback’ when ascending. When things get a bit more complex, the three holes of the Hitch Climber will accommodate the variety of different rope techniques that allow us climbing arborists to work the canopy. A complete second climbing system (or lanyard) can be added to the spare hole, making it easier to traverse between two anchors.
There are even rescue and load hauling functions! A loop of rope taken from between the hitch and the pulley can be lowered to a ground worker. Loads can be connected into the loop and hauled back up by the ground worker. It has never been so easy to get that big Stihl to a climber!
And because life doesn’t always go to plan, there are abilities in this system that would be useful in a rescue. If the casualty is positioned in such a way that lowering is impractical (e.g. over water, a road or electrical conductors) the system can be used in reverse. The rescuer can haul from above on the casualty’s system on what is effectively now a braked 3:1 mechanical advantage system. Once in a better position, the descent could take a different route. In a ‘pick-off’ rescue, friction can be easily added above the rescuers hitch to keep the operation of his/her system much the same as normal.
Too good to be true? An addition to the generic user instructions called “The Hitch Climbers’ Guide to the Canopy” helps show how Hitch Climber really can perform!
Certification
Hitch Climber pulley meets and exceeds the requirements of EN12278 (Pulleys) and EN795(c) (Anchor devices).
Download Hitch Climbers Guide (pdf)
Download Brochure (PDF format, 0.6kB)
Price: £28.50
(Excluding: VAT at 20%)
|
|
|
Ref: CA028 | ISC Small pulley
- Conforms to BS EN 12278
- Minimum breaking strain 35km
- Working load limit 7kn
- High minimum breaking strain for size and weight
- Swing cheek plates
- For use with 13mm ( 1/2") rope
Price: £14.50
(Excluding: VAT at 20%)
|
|
|
Ref: CA037 | ISC Double Pulley
Small, handy double pulley for rope up to 13 mm diameter. Ideal for paying out two-way rope.
Price: £20.50
(Excluding: VAT at 20%)
|
|
|
Ref: CA020 | Petzl FIXE Pulley with fixed side-plates
Suitable for hauling systems and as a directional pulley.
- Lightweight, compact and very strong.
- Sheave fitted with self-lubricating bushings for good efficiency.
- May be combined with a mechanical rope clamp / grab.
Certification: CE EN 12278
Technical specifications:
- Breaking strength : 11 kN x 2 = 22 kN
- Working load : 2.5 kN x 2 = 5 kN
- For use with ropes of 13 mm maximum diameter.
- 90g
- Individually tested
Data Sheet
Price: £13.50
(Excluding: VAT at 20%)
|
|
|
Ref: CA021 | Petzl RESCUE Swing-sided pulley
Designed for rescue or hauling heavy loads.
- Large sheave mounted on sealed ball bearings for high efficiency.
- Pulley specifically designed for heavy loads and intensive use.
- Triangular attachment point can accept up to three carabiners, facilitating maneuvers and installation.
Certification: CE EN 12 278
Technical specifications:
- Breaking strength : 16 kN x 2 = 32 kN
- Working load : 4 kN x 2 = 8 kN
- For use with ropes of 13 mm maximum diameter
- 186g
- Individually tested
Data Sheet
Price: £39.00
(Excluding: VAT at 20%)
|
|
|
Ref: CA022 | Petzl TANDEM In-line double pulley with aluminium sheaves
Designed for use with Tyrolean traverses on rope.
- Sheaves fitted with self-lubricating bushings for good efficiency.
- May be used at speeds of up to 10 meters/second.
- Can be used to build rope pulley systems.
- Colour : red.
Certification: CE EN 12 278
Technical specifications:
- Breaking strength 24 kN
- Working load 10 kN
- For use with ropes of maximum diameter 13 mm
- 195g
- Individually tested
Data Sheet
Price: £30.00
(Excluding: VAT at 20%)
|
|
|
Ref: MINIPRUSIK | Petzl MINI PRUSIK - Lightweight Prusik pulley
Designed for pulley systems and hauling.
Suitable for use with a Prusik hitch as a progress capture device.
Sheave fitted with sealed ball bearings for high efficiency.
Very compact, flat shape.
Certification
CE EN 12 278
Technical specifications
Breaking strenght : 8.5 kN x 2 = 17 kN.
Working load: 2 kN x 2 = 4 kN.
For use with ropes of maximum diameter 11 mm.
80 g
Individually tested
Price: £32.00
(Excluding: VAT at 20%)
|
|
|
Ref: MINITRAXION | Petzl MINI TRAXION - Compact and lightweight progress capture pulley
A multipurpose 3-in-1 device (pulley, self-jamming pulley, rope clamp / grab) for hauling a sack, raising a person, setting up a hauling system or selfbelaying.
Sheave with self-lubricating bushings is efficient and compact.
Chrome-plated steel cam has inclined teeth and self-cleaning slots to provide grip on wet, icy or muddy ropes.
Efficiently replaces the traditional pulley system set-up: pulley + carabiner + rope clamp / grab.
Also works well for Tyrolean traverses and for ascending rope...
Will find a place in all work or rescue kits.
Certification
CE EN 567 & EN 12 278
Technical specifications
Breaking strength when used as pulley only: 10 kN x 2 = 20 kN.
Working load when used as pulley only: 2.5 kN x 2 = 5 kN.
Breaking strength when used as selfjamming pulley: 4 kN.
Working load when used as selfjamming pulley: 2.5 kN.
For use with ropes from 8 to 13 mm in diameter.
164 g
Individually tested
Price: £42.00
(Excluding: VAT at 20%)
|
|
